Руководство Пользователя для Affirmative 7370

 

You can check the current mapping in one of two ways: 
•  Scan Codes.  The keyboard sends a unique scan code to the terminal when a key is pressed.  If you 

want to see what key is associated with a specific scan code, type that code in the Edit box, shown 
highlighted in the above figure.  The associated key will highlight, and any command mapped to 
that key will show in the Action boxes.  Of course, most people couldn’t care less about scan codes, 
so this method may be of little use to you. 

•  Mouse Clicks.  Position the cursor over the key of interest and click.  The scan code for that key 

will show in the Edit box, and any mapped command will show in the Action boxes.  If you want to 
see the effect of that key plus a modifier key (Shift, Alt, Ctrl), click on the modifier key and then 
on the action key. 

Note:  Since the virtual keyboard does not support a RightControl key, it is recommended that the 
Enter command be remapped to the End keys even though this is not the default.  Typically, this 
remapping will already be done when you receive a new YEStablet 7370. 
 

Activate this button to initiate custom keyboard mapping.  See:  

 for the mapping procedure. 

 

This button will erase any custom mapping that exists in this map.  Everything goes back to defaults.  
Obviously, you want to be very careful around this key if you have done much custom mapping. 

 

53