Руководство Пользователя для iRobot 330

www.irobot.com

23

 

Troubleshooting

Refer to the chart below to resolve Looj’s problem. If the problem is not 
resolved, visit www.irobot.com/support.

Observation

Likely Cause

What to do

Remote transmission 

light does not light up 

on the remote.

Remote batteries were inserted 

incorrectly or have depleted. 

Check the battery orientation or replace with 

fresh batteries. 

Robot is not 

responding to the 

remote control 

handle.

Robot power is off or there is 

radio interference between the 

remote control handle and robot.

Check to see that the robot power button is 

on and both robot and remote control handle 

lights are flashing when a remote button is 

pressed. If not, try to improve reception by 

raising the remote control handle above the 

height of the gutter while operating. Make

sure you are within range of the robot - 

15 m (45 ft).

Auger will not insert 

into robot.

Insertion hole is clogged.

Clean out hole with toothpick or 

compressed air.

Auger is spinning   

but robot is not 

moving.

Robot movement has stopped 

due to debris stuck in robot 

treads.

Retrieve robot, clean the wheels and test it 

on the ground to make sure it is operating 

properly before placing back into the gutter. 

Robot is stuck on 

gutter strap.

Gutter strap is too low or 

improperly installed.

Check gutter strap for previously existing 

damage or improper installation. Looj 

fits under all standard 2” gutter strap 

installations.

Robot is not cleaning 

effectively.

Ejector not suited for debris type. Change to different ejecter on auger.

Robot is throwing 

debris on roof.

Auger direction is incorrect.

Change the auger direction.

Improving the range of the remote control handle

Should you experience signal loss from the remote control handle to 
iRobot Looj while it is cleaning, try to improve reception by raising the 
remote control handle above the height of the gutter.

 

Charger Light

What it means

Slow Blinking Green

The battery is connected to the charger and is charging.

Fast Blinking Green

There is an error and the battery is not charging. Please make sure 

the battery is properly seated in the charger and is making proper 

contact. If the problem persists, contact customer care.

Solid Green

The battery is fully charged.