Инструкция С Настройками для Integra dpc-5.1

13

TV

Signal flow

To COAXIAL type
digital audio input

Front
speaker
(right)

Front
speaker
(left)

Optical digital cable

Amplifier equipped with
a Digital Audio Input

To OPTICAL type digital
audio input

75 

Ω

 coaxial cable

Amplifier equipped with
a DTS decoder

TV

Signal flow

To COAXIAL type
digital audio input

Front
speaker
(right)

Front
speaker
(left)

Optical digital cable

Surround
speaker (left )

Surround
speaker (right )

Sub-
woofer

To OPTICAL type digital
audio input

75 

Ω

 coaxial cable

Center speaker

•If you connect to the digital input of an amplifier that does not have a Dolby Digital decoder or DTS decoder, set the DPC-5.1’s

“Audio Out Select” function to “PCM.” Any other setting may damage your ears or speakers when using high volume levels.

•During playback of DTS-encoded audio CDs, excessive noise may be output from the ANALOG OUTPUTs. To avoid possible

damage to your audio system, we recommend you either break the connection between the DVD Changer’s ANALOG OUTPUTs
and the amplifier, or to only start playback of your DPC-5.1 after selecting the appropriate digital input source on your amplifier.

•DTS Digital Surround™ playback is only available if you connect an external 5.1-channel DTS Digital Surround™ decoder to a

DIGITAL OUTPUT jack of the DVD Changer.

Playback of DTS-encoded discs requires that you establish a digital connection with the amplifier. The selection of the DPC-5.1’s
DIGITAL OUTPUT depends on the type of digital input provided on your amplifier. Use either the DIGITAL OUTPUT COAXIAL or OPTICAL
connector. See the amplifier’s manual for details.

If your amplifier provides a digital audio input, you can establish a
digital connection between the DPC-5.1 and the amplifier. Choose this
type of connection if your amplifier is equipped with a better D/A
converter than your DPC-5.1, or if you also own a dedicated D/A
converter.

• Make the following setting:

Audio Out Select

PCM

36

• NEVER connect a DIGITAL OUTPUT jack of the DVD Changer to the

AC-3 RF input of a Dolby Digital Receiver. AC-3 RF inputs use a
different encoding format that is not supported by the DPC-5.1’s
DIGITAL OUTPUTs.

• The amplifier’s coaxial digital input may be labelled “DIGITAL” rather

than “COAXIAL”. See its manual for details.

DTS is a high-quality surround technology used in movie theaters that is
also available for home use on DVD video discs or audio CDs. If you
have a DTS decoder or processor, you can obtain the full benefit or 5.1-
channel DTS encoded sound tracks.
• DTS functionality is only available when using DVD video discs or

audio CDs with DTS encoding.

• Make the following settings:

Audio Out Select

Bitstream

36

Recording system

DTS

29

• Select the DTS mode on your amplifier.

The DPC-5.1 also allows you to output a stereo audio signal in the
digital domain. The selection of the DPC-5.1’s DIGITAL OUTPUT depends
on the type of digital input provided on your amplifier. Use either the
DIGITAL OUTPUT COAXIAL or OPTICAL connector. See the amplifier’s
manual for details.