Инструкция С Настройками для Konica Minolta 5D

Anti-shake switch

Anti-shake scale

Press the display button to switch the monitor
display among full, basic, and off. For more on
the full display, see page 16.

1.

Exposure mode (p. 39)

14. Camera-sensitivity display (p. 55)

9.

White-balance display (p. 64)

7.

AF area display (p. 57)

12. Battery condition indicator (p. 23)

8.

Frame counter (p. 73)

4.

Image-size display (p. 72)

3.

Aperture display

10. Release priority indicator (p. 93)

6.

Image-quality display (p. 72)

11. AE lock indicator (p. 46)

5.

Exposure/Flash compensation display 
(p. 48, 60)

13. Color-mode indicator (p. 61)

The full display uses a scale to show the degree of flash and exposure compensation as well as the
metered exposure value in manual exposure. The basic display uses a numerical value.

Turning off the display conserves battery power.

Basic

The Anti-Shake system minimizes the affect of camera shake, a
slight blurring caused by subtle hand motion. Camera shake is
more pronounced at long focal lengths than short ones. 

Anti-Shake is less effective with moving subjects or when the
camera is panned, with shutter speeds of 1/4 second or longer,
and short object distances. Anti-shake is disabled with bulb
exposures (p. 45).

2.

Shutter speed display

When the system is active, the Anti-Shake scale in the
viewfinder glows. Anti-Shake is turned off and on with the Anti-
shake switch.

Frame the subject as described in the basic operation section.
Press the shutter-release button partway down to focus and set
the exposure.

The Anti-Shake scale indicates the degree of stabilization. The
greater the scale displayed, the more unstable the image.
Confirm the image has stabilized with the scale and press the
shutter-release button all the way down to take the picture. 

Anti-shake cannot be used with some lenses, see page 110.
Turn Anti-Shake off when the camera is mounted on a tripod.
The metered exposure may change when turning this function
on and off.