Инструкция С Настройками для Konica Minolta 5D

The language used in the menus can be changed. Highlight the
current language and press the center of the controller to open the
language setup screen.

When the shutter-release button is pressed partway down, an
audio signal gives a positive confirmation the AF system has
focused. This signals can be turned off in section 1 of the setup
menu (p. 98). 

Use the four-way keys of the controller to select the
menu language. 

Press the central button of the controller to set the
language. Press the menu button to close the screen
without making any changes.

It is important to accurately set the clock. When a still image is recorded, the date and time of the
recording are saved with the image and are displayed during playback or can be read with the
DiMAGE Master Lite software. When the Date/Time-set option is selected and entered in section 1
of the setup menu, the date/time screen is displayed.

Use the left/right keys of the controller or rear control dial
to select the item to be changed.

Use the up/down keys or front control dial to change the
item. 

Press the central button of the controller to complete the
operation. 

When file number memory is selected, if a new folder is created,
the first file stored in the folder will have a number one greater than
the last file saved. This allows multiple folders to be created, but
the image file numbers will be in the order in which they were shot.
If the file number memory is disabled, the image file name will
have a number one greater than the last image saved in the folder. 

If file number memory is active and the memory card is changed,
the first file saved to the new card will have a number one greater
than the last file saved on the previous card if the new card does
not contain an image with a greater file number. If it does, the file
number of the new image will be one greater than the greatest on
the card.