Руководство Пользователя для SATO MB410i
Unit 4: Operation and Configuration
Page 4-26
PN 9001190C
MB400i/MB410i Operator Manual
CHOOSING THE LABEL DISPENSING MODE
You can choose to dispense labels in Continuous Mode and Dispense Mode. In either mode, test
printing and online printing are available.
printing and online printing are available.
Figure 4-23, Available Modes and Options
You can select Dispense mode for linerless labels by using the MB400i/MB410i utility.
CONFIGURING DISPENSE MODE
Table 4-1, Dispense Mode Settings
Dispense Mode can be set to Auto Print or Manual Print, as described in Table 4-1, above.
TYPE
OPERATION
Auto Print
Prints one label after receiving data and waits for
peeling. After peeling a label, automatically prints
next label.
peeling. After peeling a label, automatically prints
next label.
Manual Print
(this is the
default
setting)
(this is the
default
setting)
Prints one label after receiving data and enters
offline state. Pressing the PRINT key allows next
label to be printed. After printing the specified
number of labels, printing terminates. No printing
occurs even when the PRINT key is pressed.
offline state. Pressing the PRINT key allows next
label to be printed. After printing the specified
number of labels, printing terminates. No printing
occurs even when the PRINT key is pressed.
1234567
ABCDEFG
abcdefg
abcdefg
1234567
ABCDEFG
abcdefg
Continuous printing
Dispenser printing
(Linerless label with
perforation)
Test printing
Continuous printing
Dispenser printing
Online printing
Continuous printing
Dispenser printing
Prints the printer status
(Receives data from a PC or
handheld terminal and prints it)
handheld terminal and prints it)
(label paper/linerless label/
Journal paper)
1234567
ABCDEFG
abcdefg
1234567
ABCDEFG
abcdefg
Dispenser printing
(label paper)