Руководство Пользователя для SATO MB410i

Unit 4: Operation and Configuration

Page 4-32

PN 9001190C

MB400i/MB410i Operator Manual

The following offset adjustments for the MB400i/410i printer are usually unnecessary. Almost all
adjustments are electrical in nature due to the printer’s advanced self aligning and balancing
design features. However, if you need to perform the adjustments, they can be sent as
commands to the printer. Consult your SATO representative for information on programming the
MB400i/410i printer, or refer to the Programming Reference guide found on the CD-ROM.

Adjustment

Method

Description

Printer Setting
Commands

Use the <PG>
programming
command.

Saves the values to
the Flash ROM.

Base Point Offset

Pitch Offset

Dispense Offset

Tear-Off Offset

Base Point Offset

Use 

the 

<A3>

programming
command.

Takes effect instantly;
the value is cleared
once the power is
turned off.

Pitch 

Offset

Use the <PO3>
programming
command.

Takes effect instantly;
the value is cleared
once the power is
turned off.

Dispense 

Offset

Use the <PO1>
programming
command.

Takes effect instantly;
the value is cleared
once the power is
turned off.

Tear-Off 

Offset

Use the <PO2>
programming
command.

Takes effect instantly;
the value is cleared
once the power is
turned off.