Эксплуатация Оборудования для IBM 240x
Introduction
Important Service Information
Important
Diskette fixes are customer installable. The diskette
fixes are posted on the IBM Support site
fixes are posted on the IBM Support site
http://www.pc.ibm.com/support
Advise customers to contact the PC Company
HelpCenter at 800-772-2227 if they need assistance in
obtaining or installing any diskette fixes.
HelpCenter at 800-772-2227 if they need assistance in
obtaining or installing any diskette fixes.
FRU Replacement Strategy
Before Replacing Parts
Ensure that all diskette fixes are installed prior to
replacing any FRUs listed in this manual.
replacing any FRUs listed in this manual.
Use the following strategy to prevent unnecessary FRU
replacement and service expense:
replacement and service expense:
If you are instructed to replace a FRU and that
does not correct the problem, reinstall the original
FRU before you continue.
does not correct the problem, reinstall the original
FRU before you continue.
Some computers have both a processor board and a
system board. If you are instructed to replace either
the processor board or the system board, and the first
board that you replaced does not correct the problem,
reinstall the original board, then replace the other
(processor or system) board.
system board. If you are instructed to replace either
the processor board or the system board, and the first
board that you replaced does not correct the problem,
reinstall the original board, then replace the other
(processor or system) board.
If an adapter or device consists of more than one
FRU, an error code may be caused by any of the
FRUs. Before replacing the adapter or device,
remove the FRUs, one by one, to see if the symp-
toms change. Replace only the FRU that changed
the symptoms.
FRU, an error code may be caused by any of the
FRUs. Before replacing the adapter or device,
remove the FRUs, one by one, to see if the symp-
toms change. Replace only the FRU that changed
the symptoms.
Attention
A customized setup configuration (other than default
settings) may exist on the computer you are servicing.
Running Automatic Configuration may alter those set-
tings. Note the current configuration settings (using
the View Configuration option) and verify that the set-
tings are in place when service is complete.
settings) may exist on the computer you are servicing.
Running Automatic Configuration may alter those set-
tings. Note the current configuration settings (using
the View Configuration option) and verify that the set-
tings are in place when service is complete.
Hard Disk Drive Replacement Strategy:
Always try to run a low-level format before replacing a hard
disk drive.
disk drive.
Introduction
1