Эксплуатация Оборудования для IBM 570

 

VGA Information

IDE Drive Info

 

PCI Information

 

PNPISA Info

 

SMBIOS Info

 

FRU Info

Run External Tests

Surface Scan Hard Disk

 

Benchmark System

 

DOS Shell

Tech Support Form

 

Battery Rundown

View Test Log

 

Print Log

 

Save Log

Full Erase Hard Drive

Quick Erase Hard Drive

To verify the symptom of a problem, do the following:

1. Power off the computer.
2. Remove the battery pack.
3. Connect the ac adapter.
4. Check that power is supplied when you power on the

computer.

5. Power off the computer.
6. Disconnect the ac adapter and install the charged

battery pack.

7. Check that power is supplied by the battery pack

when you power on the computer.

If you suspect a power problem, see the appropriate one
of the following power supply checkouts:

“Checking the ac adapter”

“Checking operational charging” on page 30

“Checking the battery pack” on page 30

“Checking the backup battery” on page 31

You are here because

the computer fails only when the ac adapter is used:

If the power problem occurs only when the port
replicator is used, replace the port replicator.

If the power-on indicator does not turn on, check the
power cord of the ac adapter for correct continuity
and installation.

If the computer does not charge during operation, go
to “Checking operational charging” on page 30.

1. Unplug the ac adapter cable from the computer and

measure the output voltage at the plug of the ac
adapter cable. See the following figure:

  

General 

descriptions