Руководство Пользователя для IBM transnote
12
Chapter 1
Other status display symbols
Pen. Ink is being recorded. It appears whenever you touch the
digital pen on the digital notepad. If it does not appear, it might be
time to change the pen battery, described later in this chapter.
Hourglass. Ink is transferring to the computer. Wait until the
hourglass disappears before you resume writing. If Ink Manager
Pro is running, the Current Notepad focus changes to the
thumbnail with the most recent ink.
Disconnected (or a blinking Ink Transfer icon
Pen. Ink is being recorded. It appears whenever you touch the
digital pen on the digital notepad. If it does not appear, it might be
time to change the pen battery, described later in this chapter.
Hourglass. Ink is transferring to the computer. Wait until the
hourglass disappears before you resume writing. If Ink Manager
Pro is running, the Current Notepad focus changes to the
thumbnail with the most recent ink.
Disconnected (or a blinking Ink Transfer icon
in the status
tray). Ink is not transferring to the computer. If the Ink Transfer
icon does not appear in the status tray, start the utility using Start
> Programs > IBM Ink Manager Pro > Utilities > IBM Ink
Transfer. Or see Chapter 10: Troubleshooting.
Graphics Tablet Mode enabled. Your ink is not being recorded.
Instead, your digital pen is enabled as a graphics input device. For
more information, see Chapter 9: Special Features. To disable
Graphics Tablet Mode, tap OK.
Low memory (and the amber Error indicator light illuminates).
The memory in the digital notepad is full. To clear the memory,
turn on the computer and let your recorded ink transfer to the
computer. After the hourglass disappears, you can turn off the
computer again, and continue writing on the digital notepad.
Low battery (and the amber Error indicator light illuminates).
The computer battery is too low for the digital notepad to
operate. The digital notepad will shut down in one minute unless
you either use the AC adaptor or replace the computer battery.
icon does not appear in the status tray, start the utility using Start
> Programs > IBM Ink Manager Pro > Utilities > IBM Ink
Transfer. Or see Chapter 10: Troubleshooting.
Graphics Tablet Mode enabled. Your ink is not being recorded.
Instead, your digital pen is enabled as a graphics input device. For
more information, see Chapter 9: Special Features. To disable
Graphics Tablet Mode, tap OK.
Low memory (and the amber Error indicator light illuminates).
The memory in the digital notepad is full. To clear the memory,
turn on the computer and let your recorded ink transfer to the
computer. After the hourglass disappears, you can turn off the
computer again, and continue writing on the digital notepad.
Low battery (and the amber Error indicator light illuminates).
The computer battery is too low for the digital notepad to
operate. The digital notepad will shut down in one minute unless
you either use the AC adaptor or replace the computer battery.
Changing the notepad
To order pre-numbered
notepads and other
supplies, visit our Web site
by pressing the ThinkPad
button on the computer.
Then select the Service &
Support link.
notepads and other
supplies, visit our Web site
by pressing the ThinkPad
button on the computer.
Then select the Service &
Support link.
Use any regular notepad, such as letter size (8-1/2” X 11") or A4
(8” X 11-1/2”), as long as the cardboard backing fits snugly in the
notepad slot. Or use the pre-numbered notepads especially
designed for the ThinkScribe.
For correct alignment, make sure that the lower, left corner of the
pad is seated in the lower-left corner of the recessed area on the
digital notepad.
(8” X 11-1/2”), as long as the cardboard backing fits snugly in the
notepad slot. Or use the pre-numbered notepads especially
designed for the ThinkScribe.
For correct alignment, make sure that the lower, left corner of the
pad is seated in the lower-left corner of the recessed area on the
digital notepad.