Инструкция С Настройками для Samsung HT-P1200

ENG

Front/Rear Speaker (4EA)

Center Speaker

Front/Rear Stand (4EA)

Subwoofer Speaker

Speaker Cable (5EA)

Screw (8EA)

Speaker

Accessories

Drive screws (2) into the wall for each
speaker and then hook the front and rear
speakers over them.

Hook the speakers

so that the screws are

in the position of the

figure.

Installing the DVD player

(con’t)

Installing Speakers

Please confirm that all the following contents are
included in the package.

Speaker Packages

CONNECTIONS

Assembling the Speakers

Set the front speaker on the
front stand.

Connect the front speaker
cable to the rear side of the
front stand.

Fix the speaker and the
stand with the screws.

•

Connect the speaker cable to the connection port of either the front speaker or the front stand. Both of
the connection ports will work.

•

If you have combined the front speaker and the stand, connecting the speaker cable to the connection
port on the rear side of the front stand is recommended.

Note

To mount the speakers on the wall

Tidying Cables Up

Push the cables connected to the
HDMI OUT, Component OUT, Video
OUT ports into the groove shown
in figure 1 using the Wire Hanger.

Push the cables connected to the
Audio IN, Anynet IN/OUT, Optical
Digital Audio IN and Audio OUT ports
into the groove shown in figure 2.

Open the holder cover of the round
board on the bottom of the stand and
pass the cables through the holder.

Squeeze the cables into the groove on
the holder of the round board.

Close the holder cover.

Round Board Holder

Rear Side of
the Main Unit

Wire Hanger