Руководство Пользователя для Samsung HT-TX72

ENG

CONNECTIONS

Connecting Audio from External Components

(Con’t)

Connecting the FM Antenna

SPEAKERS OUT
(IMPEDANCE 3

)

FM Antenna (supplied)

Connect the FM antenna supplied to the FM 75

COAXIAL Jack.

Slowly move the antenna wire around until you find a location where reception is good, then fasten it

to a wall or other rigid surface.

• This unit does not receive AM broadcasts.

Please observe the following cautions for your safety.

■

Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the
unit may rise and may damage it.

■

Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.

The cooling fan supplies cool air to the unit to prevent overheating.

Cooling Fan

SPEAKERS
(IMPEDANCE

Audio Cable

(not supplied)

If the external analog

component has only one

Audio Out, connect either left

or right.

AUX2 : Rear Panel

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Set-Top Box.

Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital

component.

Press the AUX button on the remote control to select <DIGITAL IN>.

■

You can also use the FUNCTION button on the main unit.

The mode switches as follows : DVD/CD

➝

DIGITAL IN

➝

AUX 1

➝

AUX 2

➝

HDMI IN

➝

USB

➝

XM.

OPTICAL : Rear Panel

Optical Cable

(not supplied)

AUX2 : Connecting an External Analog Component

Analog signal components such as a VCR.

Connect the AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.

■

Be sure to match connector colors.

Press the AUX button on the remote control to select <AUX2> input.

■