Руководство Пользователя для Iwatsu dckt970
Chapter 3 Installing Your DCKT970
21
could cause a hazard when inserting screws into the
wall.
wall.
Make sure the wall material is capable of
supporting the weight of the Charging Unit.
supporting the weight of the Charging Unit.
Use #10 screws with anchoring devices suitable for
the wall material where the Charging Unit will be
placed.
the wall material where the Charging Unit will be
placed.
1. Insert two mounting screws into
the wall 1-9/10 inches apart. Allow
about 3/16 of an inch between the
wall and screw heads for mounting
the phone.
about 3/16 of an inch between the
wall and screw heads for mounting
the phone.
2. Plug the AC Adapter into the
Charging Unit as previously
described. Wrap the AC Adapter
cord around the strain relief.
described. Wrap the AC Adapter
cord around the strain relief.
3. Place the Charging Unit on the
posts of the wall screws and
push down until it is firmly
seated.
push down until it is firmly
seated.