Инструкция С Настройками для ICOM ic-207h

POCKET BEEP AND TONE SQUELCH

Push [BAND] to select the desired band, if nec-
essary.

Set the operating frequency.

Program the subaudible tone frequency in set
mode.

• See p. 26 for programming details.

Push [FUNC] then [

➇T SQLS] to turn the

pocket beep ON.

When a signal with the correct tone is received,
the transceiver emits beep tones for 30 sec.
and flashes “S.”

Push [PTT] to answer or push [ECLR] to stop
the beeps and flashing.

• Tone squelch is automatically selected.
• Pushing [FUNC] then [

➈TSQL] also selects the tone

squelch.

To cancel the function, push [FUNC] then
[GT-OFF].

D Calling a waiting station using pocket beep

A subaudible tone matched with the stations frequency is
necessary. Use the tone squelch on the next page or a sub-
audible tone encoder (pgs. 24, 25).

■ Pocket beep operation

This function uses subaudible tones for calling and can be
used as a “common pager” to inform you that someone has
called while you were away from the transceiver.

D Waiting for a call from a specific station

➀

Push [BAND] to select a band, if necessary.

➁

Set the operating frequency.

➂

Program the subaudible tone frequency in set mode.

• See p. 26 for programming details.

➃

Push [TONE] one or more times to indicate “T SQLS”
in the function display.

➄

When a signal with the correct tone is received, the trans-
ceiver emits beep tones and flashes “S”.

• Beep tones sound for 30 sec. To stop the beeps manually, push

the tuning dial (or any key).

• “S” flashes continuously until step

➅ or ➆.

• When receiving another call while “S” is flashing, no beeps sound.

➅

Push [PTT] to answer.

• Tone squelch is automatically selected when transmitting.

➆

Push [TONE] once or twice to cancel the function.

T SQLS

T-OFF