Инструкция С Настройками для ICOM ic-2100h
3
1
PANEL DESCRIPTION
u
MEMORY/CALL CHANNEL SWITCH [M/CALL(PRIO)]
➥
Selects and toggles memory mode or the call channel.
(pgs. 26, 32)
(pgs. 26, 32)
➥
Activates the priority watch function when pushed and
held. (p. 42)
held. (p. 42)
i
TONE/TONE SCAN SWITCH [TONE(T-SCAN)]
➥
Each push selects a tone function. (p. 46)
• Tone encoder, pocket beep, tone squelch or tone func-
tion OFF can be selected.
➥
Push and hold to start/stop the tone scan function.
(p. 48)
(p. 48)
o
OUTPUT POWER/DUPLEX SWITCH [LOW(DUP)]
➥
Each push changes the output power selection. (p. 19)
• There are 3 output powers available: low, mid and high
(the IC-2100-T Thailand and IC-2100H Taiwan versions have
only 2 output powers).
➥
Push and hold to select a duplex setting. (p. 21)
• There are 3 duplex settings available: minus duplex
(“DUP–” appears), plus duplex (“DUP” appears) and
simplex (no indicator appears).
simplex (no indicator appears).
!0
MONITOR/ALPHANUMERIC SWITCH [MONI(ANM)]
➥
Toggles squelch opened and closed when pushed.
(p. 18)
(p. 18)
➥
In memory and call channel mode, toggles the alphanu-
meric channel indication ON and OFF. (p. 31)
meric channel indication ON and OFF. (p. 31)
!1
SET/LOCK SWITCH [SET(LOCK)]
➥
Selects set mode when pushed.
➥
Toggles the lock function ON and OFF when pushed
and held. (p. 14)
and held. (p. 14)
!2
MICROPHONE CONNECTOR
Connects the supplied microphone. (p. 7)
D
Microphone connector (front panel view)
➀
+8 V DC output
➁
Frequency up/down
➂
NC (no connection)
➃
PTT
➄
GND (microphone ground)
➅
MIC (microphone input)
➆
GND
➇
NC (no connection)
➀
➇