Справочник Пользователя для TROY Group 3005

Document #50-70430-001 Rev. B 

Page 3 of 11

 

15.  Click on Finish to complete the installation.  The printer driver installation will proceed automatically 

and add the printer icon to the printer folder. 

 

The TROY metrics file contains the required escape sequences that are used to “call” the TROY security and/or 
barcode fonts installed in the TROY Security Printing Solution (via the TROY Memory Card).  When properly 
installed, the TROY metrics file will be associated with the PCL 5e printer driver used by your TROY printer to 
enable printing of the actual fonts installed in the printer.  By associating the metrics file with the printer driver, 
the TROY TrueType screen fonts will be automatically replaced with the actual TROY fonts at print time.  If the 
TROY metrics file is not properly installed, then the TROY TrueType screen fonts will print instead of the 
actual TROY installed printer fonts. 

 

1.  Close all applications before installing the TROY Font support files. 

2.  Insert the TROY Security Printing Solutions CD into your computer CD-ROM drive. 

3.  From the Microsoft Windows Start menu, click on Settings, and then click on Printers. 

4.  Right-click on your TROY Security Printing Solution icon, and then click on Properties from the pull-

down menu.  If multiple printers are installed, make sure the correct printer icon is selected that 
corresponds to your TROY Security Printing Solutions printer. 

5.  Click on the Configure tab located at the top of the Properties window. 

6.  Within the Other Options category, click on the More button.  Some printer driver versions may not 

display the Other Options category.  If this is the case, simply skip to the next step. 

7.  Within the Fonts category, place a check mark in the Font Cards checkbox, and then click on the 

Configure button (with some printer driver software versions, the Configure button may already be 
“clicked”).  A new window will open labeled Configure Font Cards. 

8.  Click on the Add button to open the Add Font Card window. 

9.  Click on the Browse button to open a Windows Explorer-style window.  Click on the down-arrow in the 

Drives box to select the CD-ROM drive on your computer.  Double-click on the Support Files folder 
from the list of folders, double-click on the HPD Files folder, and then double-click on the Domestic 
folder.  For international products, double-click on the International folder. 

10.  Click on the file (located in the left-hand window) named TroySEC.hpd or TroySECINTL.hpd (for 

International customers), and then click on Open or OK (the displayed window may vary depending on 
the operating system being used).  With some printer drivers, the Add Font Card window will appear.  
If this window appears, click on OK to close the window. 

11.  Within the Configure Font Cards window, verify the installation by clicking on the Font Card Name: 

TROY Security Font Collection or TROY International Security Font Collection listed under Installed 
Font Cards.  Within the Fonts list, the TROY E-13B (enabled) along with other TROY fonts will be 
displayed. 

12.  Repeat Steps 9 through 11 to install the barcode fonts.  Double-click on the Support Files folder, the 

HPD Files folder, and the Barcode folder, and then select the TroyBAR.hpd file.  Verify the installation 
by clicking on the Font Card Name: TROY Barcode Font Collection listed under Installed Font Cards.  
Within the Fonts list, the TROY barcode fonts will be displayed.