Сетевое Руководство для Epson EPL-N2550
116
How To
❏ When the primary server is down during operation
Connection to the primary server is periodically attempted,
but no dial-up is generated. However, if the router is set to
pass SAP packets (Find Nearest Server), an unnecessary
dial-up might be generated. To avoid this, turn off the printer
once, or do not allow the router to pass SAP packets (Find
Nearest Server).
but no dial-up is generated. However, if the router is set to
pass SAP packets (Find Nearest Server), an unnecessary
dial-up might be generated. To avoid this, turn off the printer
once, or do not allow the router to pass SAP packets (Find
Nearest Server).
For Users of Printers Not Supporting NetWare
Queue-Based Printing
Queue-Based Printing
This section explains how to configure the network interface for
NetWare.
NetWare.
To print in a NetWare environment, you need to use NDPS. First,
install EpsonNet NDPS Gateway on the NetWare server, and then
set a valid IP address to the network interface using EpsonNet
Config.
install EpsonNet NDPS Gateway on the NetWare server, and then
set a valid IP address to the network interface using EpsonNet
Config.
Note:
Be sure to set a static IP address to the network interface.
Be sure to set a static IP address to the network interface.
Introduction to NetWare settings
Supported systems
Server environment
❏ NetWare 5.0/5.1 (NDPS)
❏ NetWare 6.0 ( NDPS)
Client environment
The client environment must be supported by NetWare.
The clients are able to use the printer driver mounted on the
network interface.
The clients are able to use the printer driver mounted on the
network interface.