Сетевое Руководство для Epson EPL-N2550
Troubleshooting
217
4
4
4
4
4
4
4
4
4
4
4
4
Unable to set the IP address using the arp/ping
commands.
commands.
The Model Name and IP Address do not appear
in the EpsonNet Config dialog box.
in the EpsonNet Config dialog box.
An extra account is generated when using the
dial-up network.
dial-up network.
Cause
What to do
The network interface is not
connected to the network.
connected to the network.
Connect the network interface to the
network, and check the network
environment.
network, and check the network
environment.
The printer is located
beyond the router.
beyond the router.
The printer and the computer must be in the
same segment.
same segment.
Cause
What to do
If the valid IP address is not
set, the items indicated in
the dialog box mentioned
above may not appear.
set, the items indicated in
the dialog box mentioned
above may not appear.
Set a valid IP address.
Refresh the status by selecting Refresh from
the View menu.
the View menu.
Increase the length of time before a
timeout. To do this, select Options from the
Tool menu, and then select Timeout. Note
that doing so can cause EpsonNet Config
to run more slowly.
timeout. To do this, select Options from the
Tool menu, and then select Timeout. Note
that doing so can cause EpsonNet Config
to run more slowly.
Cause
What to do
NetWare is set to Enable
even though you are not
using NetWare.
even though you are not
using NetWare.
Set NetWare to Disable on the NetWare
screen of EpsonNet Config with Web
Browser.
screen of EpsonNet Config with Web
Browser.
How to acquire an IP address.
To acquire your IP address, you need to apply to the NIC (Network
Information Center) in your country.
To acquire your IP address, you need to apply to the NIC (Network
Information Center) in your country.