Сетевое Руководство для Epson EPL-N2550
78
How To
Using the NET USE command
If you are running Windows XP/Server 2003/2000/NT and using
NetBIOS to connect to the network interface, we recommend that
you use the NET USE command, as follows:
NetBIOS to connect to the network interface, we recommend that
you use the NET USE command, as follows:
1. Check that the following services are installed.
Right-click the Network Neighborhood icon on the desktop
and select Properties. Click the Services tab and check that
Server or Workstation is listed.
and select Properties. Click the Services tab and check that
Server or Workstation is listed.
2. If it is not installed, click Add.
3. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of network
interface\Device name of network interface
interface\Device name of network interface
Selecting the port
1. Click Start, point to Settings, and then select Printers.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set with
the NET USE command.
Macintosh
Follow the steps below to set a printer.
Note:
Make sure that the printer driver is installed on your Macintosh before
following the steps below. See the manual shipped with your printer for
instruction on how to install the printer driver.
Make sure that the printer driver is installed on your Macintosh before
following the steps below. See the manual shipped with your printer for
instruction on how to install the printer driver.