Справочник Пользователя для Epson LX-80
Appendix G
Printer Maintenance
Always
Always keep your printer in a safe and clean location. Keep it away
from :
Dust and grease
Heaters and furnaces. Safe temperature range is
41°F
(5°C) to 95°F (35°C)
Now and Then
Clean particles and dust from the printer every so often with a soft
cloth or brush. Use a mild cleanser for the outside framework and,
after removing the ribbon cassette, denatured alcohol for the inside.
after removing the ribbon cassette, denatured alcohol for the inside.
See your Epson dealer for replacement ribbon cassettes.
Rarely
Once in a great while your printer should be lubricated. Epson
recommends two lubricants: O-2 (Epson Part No. B710200001) and
G-2 (Epson Part No. B70020001). Every 6 months or one million
lines, use O-2 lubricant on the shafts and platen bearings, wiping off
excess with cloth. Use G-2 sparingly on ribbon feed, line feed, and
excess with cloth. Use G-2 sparingly on ribbon feed, line feed, and
carriage return drive gears every five million lines.
Note: Using too much lubricant can cause problems with your
printer. Apply the lubricant sparingly.
G-1