Инструкции По Установке для Lexmark 3100 mfp
26
Attach cables and power cords
Step 6: Attach cables and power
cords
Attaching cables
to the printer
to the printer
Connect the printer to the telephone line, network, and MFP.
Note:
Germany: Use only
the German TAE type F
adapter shipped with this
product because it contains
a billing tone filter. The
adapter is designed only for
the F connector of the
German wall outlet. This
must be the only device
attached to the NFN wall
receptacle.
Switzerland: Use only the
Swiss adapter shipped with
this product because it
contains a billing tone filter.
adapter shipped with this
product because it contains
a billing tone filter. The
adapter is designed only for
the F connector of the
German wall outlet. This
must be the only device
attached to the NFN wall
receptacle.
Switzerland: Use only the
Swiss adapter shipped with
this product because it
contains a billing tone filter.
1
Connect the RJ-11 telephone fax line cable into the fax modem
port on the back of the print server installed in your printer.
port on the back of the print server installed in your printer.
2
If you received a telephone adapter specifically designed for
use in your country, attach the telephone adapter to the
telephone fax line cable and plug the fax line cable into the
phone line outlet.
use in your country, attach the telephone adapter to the
telephone fax line cable and plug the fax line cable into the
phone line outlet.
3
Connect the Ethernet cable into the Ethernet network port on
the back of the print server installed in your printer.
the back of the print server installed in your printer.
4
Connect the scanner cable to the printer, but do not turn the
power on yet.
power on yet.
Scanner cable
Ethernet
network cable
network cable
Telephone fax line
cable (RJ-11)
cable (RJ-11)