Руководство Пользователя для SpeakerCraft AIM7 FIVE
AIM7 Owner’s Manual
Page 5
ADJUSTING THE FREQUENCY RESPONSE
The output of the woofer and tweeter on the AIM7 Two, Three, Four and Five can be adjusted to suit any environment. In
general, we recommend leaving all of the adjustments at the flat (0dB) setting. To determine which settings will be
appropriate for your speakers, you may need to experiment until the desired sound is achieved. Use the chart below to
determine the result of the setting you select.
general, we recommend leaving all of the adjustments at the flat (0dB) setting. To determine which settings will be
appropriate for your speakers, you may need to experiment until the desired sound is achieved. Use the chart below to
determine the result of the setting you select.
Selecting a Setting on AIM7
To select a setting, simply use a finger to move the
switches mounted on the inner side of the speaker to
the desired setting (See Figure 7).
switches mounted on the inner side of the speaker to
the desired setting (See Figure 7).
AIM7 Two: Treble adjustment Only
AIM7 Three, Four and Five: Treble and Bass adjustments
AIM7 Three, Four and Five: Treble and Bass adjustments
Frequency Settings
When selected, the settings will have the following result:
-3dB: Reduces the loudness of the selected frequency (bass & treble)
0dB: The selected frequency (bass & treble) remains at neutral level
+3dB: Increases the loudness of the selected frequency (bass & treble)
When adjusting the bass frequency, the impedance will be affected as indicated below. Be sure to stay within the impedance
guidelines of the amplifier you will be using to power your system.
guidelines of the amplifier you will be using to power your system.
-3dB: The impedance is 8 ohms
0dB: The impedance is 6 ohms
+3dB: The impedance is 4 ohms
"!33
!
)-
IV
E
42%",%
«
i>
i
À
À>
vÌ
42%",%
Figure 7
Treble adjustment