Инструкции Пользователя для Standard Horizon CP1000C
FF520
Page 29
NOTE (**)
Thus imposing the capability of the Fish Finder to correctly detect the weakest echoes coming from
a very deep bottom.
4.5
ALARMS
The Alarms menu allows you to define alarm settings for Shallow Alarm, Depth Alarm and
Temperature Upper/Lower/Rate. To set an Anchor Alarm, enter in a shallow water and
depth value above and below your actual anchoring depth. The alarm will sound if the anchor
is dragged shallower or deeper than the settings.
Temperature Upper/Lower/Rate. To set an Anchor Alarm, enter in a shallow water and
depth value above and below your actual anchoring depth. The alarm will sound if the anchor
is dragged shallower or deeper than the settings.
Figure 4.5 - Alarms sub-menu
Shallow Water
: Triggers an alarm when depth becomes shallower than the value set.
Depth Water
: Triggers an alarm when depth becomes deeper than the value set.
Fish Alarm
: The options for Fish Alarm set the size of the fishes that, if detected by the unit, switches an
alarm to sound. These options are: Off, Small, Medium, Big and Huge. The alarm sounds if
the set size (or bigger) is detected.
the set size (or bigger) is detected.
Temperature Upper
: Triggers an alarm when the transducer reports a temperature above the value set.
Temperature Lower
: Triggers an alarm when the transducer reports a temperature below the value set.
Temperature Rate
: Triggers an alarm when the transducer reports a temperature variation rate above the value set.
4.6
TRANSDUCER SETUP
This menu allows you to calibrate the speed through the water, water temperature and the
keel/prop offset of the transducer.
keel/prop offset of the transducer.
Figure 4.6 - Transducer Setup sub-menu