Дополнительное Руководство для Standard Horizon CP1000C
Page 10
ADDENDUM
3.0.3 Dynamic Nav-Aids
This function allows settings blinking lights on Nav-Aids. The blink period and color of each
Nav-aid is read from the Nav-Aid attributes available on the data cartridge. When the ship
is inside the Nav-Aid nominal range, the light of the Nav-Aid will start blinking.
Nav-aid is read from the Nav-Aid attributes available on the data cartridge. When the ship
is inside the Nav-Aid nominal range, the light of the Nav-Aid will start blinking.
To activate this function follow the procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press
1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press
[ENTER] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight DYNAMIC NAV-AIDS and press [ENTER] or
move the ShuttlePoint knob to the right.
3. The menu now shows two selections, ON or OFF.
4. Move the ShuttlePoint knob to select the selection and press [ENTER].
5. Press [CLEAR] until the menu disappears or an easier method is to move the
4. Move the ShuttlePoint knob to select the selection and press [ENTER].
5. Press [CLEAR] until the menu disappears or an easier method is to move the
Shuttlepoint knob to the left until the chart page is shown.
3.0.4 Safety Status Bar
This feature displays a status bar with six boxes showing the status of certain functions. Any
warning or alarm condition is identified by the red color to indicate possible risk.
warning or alarm condition is identified by the red color to indicate possible risk.
1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press
[ENTER] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight SAFETY STATUS BAR and press [ENTER]
or move the ShuttlePoint knob to the right.
3. The menu now shows two selections, ON or OFF.
4. Move the ShuttlePoint knob to select the selection and press [ENTER].
5. Press [CLEAR] until the menu disappears or an easier method is to press the
4. Move the ShuttlePoint knob to select the selection and press [ENTER].
5. Press [CLEAR] until the menu disappears or an easier method is to press the
ShuttlePoint knob to the left a few times.
Figure 3.0.4 - Safety Status Bar
Boxes definition is as follows:
Zoom
♦
Normal: when the chart is displayed at normal scale.
♦
U. Zoom: red when the chart is under-zoomed out more than twice normal
scale, gray otherwise.
♦
O. Zoom: red when the chart is over-zoomed in more than twice normal scale,
gray otherwise.
♦
Chart Lock: red when the chart is zoomed in more than twice normal scale,
gray otherwise.
NOTE
U. Zoom, O. Zoom and chart lock are used with Flexizoom selected.
Best Scale
Red when a more detailed chart is available under the cursor position.