Листовка для Emulex LightPulse LPe111-E LPE111-E
Модели
LPE111-E
Standards
•
ANSI Fibre Channel
- FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4,
FC-FLA, FC-PLDA, FC-TAPE, FCP-2
•
Fibre Channel class 2 and 3
•
PHP hot plug - hot swap
•
lP101: PCI-X 1.0a and PCI 2.3
•
lPe111: PCI Express base spec 1.0a
•
PCI Express card electromechanical spec 1.0a
Architecture
•
Single-channel
•
Up to 16 total port logins available
•
lP101: 2Gb/s or 1Gb/s FC Link speeds
automatically detected
•
lPe111: 4Gb/s, 2Gb/s or 1Gb/s FC Link speeds
automatically detected
Comprehensive OS Support
•
Windows, Linux
Hardware Environments
•
x86 and x64 processor families
Optical
•
Data rates
- lP101: 1.0625 and 2.125Gb/s auto-detected
- lPe111: 1.0625, 2.125 and 4.25Gb/s
- lPe111: 1.0625, 2.125 and 4.25Gb/s
auto-detected
•
Optics
- Short wave lasers with LC type connector
•
Cable
- 50/125
µm, up to 300 meters at 2Gb/s;
150 meters at 4Gb/s
- 62.5/125
µm, up to 150 meters at 2Gb/s;
70 meters at 4Gb/s
Physical Dimensions
•
Short, low-profile MD2 form factor card
•
167.64mm x 64.42mm (6.60" x 2.54")
•
Standard bracket (low profile available)
Specifications
LightPulse
®
lP101 and lPe111
PCI-X and PCI EXPrESS
SMB FIBrE CHANNEl HBAs
(Specifications apply to both the LP101 and LPe111
unless otherwise noted.)
www.emulex.com
This document refers to various companies and products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or
registered trademarks. This information is provided for reference only. Although this information is believed to be accurate and reliable at the time of publication, Emulex assumes
no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice. This report is the property of Emulex Corporation and may not be
duplicated without permission from the Company.
08-853 · 2/08
World Headquarters 3333 Susan Street, Costa Mesa, CA 92626 +1 714 662 5600
Wokingham, uK +44 (0) 118 977 2929 | Munich, Germany +49 (0) 89 97007 177
Paris, France +33 (0) 158 580 022 | Beijing, China +86 10 68499547
Power & Environmental requirements
•
Volts
- lP101: +3.3 and +5V
- lPe111: +3.3
- lPe111: +3.3
•
Operating temperature
- lP101: 5° to 45°C (41° to 113°F)
- lPe111: 0° to 55°C (32° to 131°F)
- lPe111: 0° to 55°C (32° to 131°F)
•
Airflow required
- lP101: 100 lf/m
- lPe111: Natural Convection
- lPe111: Natural Convection
•
Storage temperature: -40° to 70°C
(-40° to 158°F)
•
Relative humidity: 5% to 95% non-condensing
Agency Approvals
•
Class 1 Laser Product per DHHS 21CFR (J)
and EN60825
•
UL recognized to UL 60950-1
•
CUR recognized to CSA22.2, No. 60950-1-03
•
TUV certified to EN60950
•
lP101
- FCC rules, Part 15, Class A
- ICES–003, Class A
- EMC Directive 2004/108/EEC (CE Mark)
- ICES–003, Class A
- EMC Directive 2004/108/EEC (CE Mark)
· EN55022, Class A
· EN55024
- Australian EMC Framework (C–Tick Mark)
- Australian EMC Framework (C–Tick Mark)
· AS/NZS CISPR22, Class A
- VCCI, Class A
- MIC (Korea), Class A
- BSMI (Taiwan), Class A
- VCCI, Class A
- MIC (Korea), Class A
- BSMI (Taiwan), Class A
•
lPe111
- FCC rules, Part 15, Class B
- ICES-003, Class B
- EMC Directive 2004/108/EEC (CE Mark)
- ICES-003, Class B
- EMC Directive 2004/108/EEC (CE Mark)
· EN55022, Class B
· EN55024
- Australian EMC Framework (C–Tick Mark)
- Australian EMC Framework (C–Tick Mark)
· AS/NZS CISPR22, Class B
- VCCI, Class B
- MIC (Korea), Class B
- BSMI (Taiwan), Class B
- VCCI, Class B
- MIC (Korea), Class B
- BSMI (Taiwan), Class B
Ordering Information
•
Available from select storage partners
Software Features
•
The Emulex feature-rich AutoPilot software
suite speeds and simplifies device
management, while reducing administration
costs and protecting your IT investment.
•
For administrators of smaller Storage Area
Networks (SANs), Emulex AutoPilot Installer
and AutoPilot Manager simplify the installation
and management of HBAs for small and medium
businesses and departmental SANs. Packaged
with the Emulex LightPulse SMB HBAs and
delivered by our OEM partners, Emulex
AutoPilot Installer enables HBA installation
with just a few mouse clicks, while AutoPilot
Manager provides an easy-to-use interface
for HBA management and maintenance. When
combined with right-sized switches and arrays
from our storage partners, the performance
and reliability of SANs can be realized with a
minimum of complexity.