Инструкция для Sony DSLR-A700
126
For details on the operation
1 page 32
• After the image sensor vibrates for a short time, the mirror in front is lifted.
4
Detach the lens.
5
Use the blower to clean the image sensor surface and the surrounding area.
• Do not touch the image sensor with the tip of the blower. Complete the cleaning quickly.
• Hold the camera’s face downward to prevent the dust from resettling in the camera.
• Do not use a spray blower because it may scatter vapor inside the camera body.
•
• Hold the camera’s face downward to prevent the dust from resettling in the camera.
• Do not use a spray blower because it may scatter vapor inside the camera body.
•
When cleaning the image sensor, do not put the tip of a blower into the cavity
beyond the lens mount. You do not need to put the blower close to the image
sensor.
beyond the lens mount. You do not need to put the blower close to the image
sensor.
6
Attach the lens and set the POWER switch to OFF.
• The camera starts beeping if the battery pack becomes low during cleaning. Stop the cleaning
immediately and set the POWER switch to OFF.
z
To keep dust from entering the camera
• Choose a location with little dust to change the lens, and complete the operation quickly.
• Do not leave the camera without a lens or the body cap.
• When attaching the body cap, remove all the dust from the cap before placing it on the camera.
• Do not leave the camera without a lens or the body cap.
• When attaching the body cap, remove all the dust from the cap before placing it on the camera.
You can reset the main functions of the camera.
1
Select [Reset default], then press the center of the multi-selector.
The message “Reset default?” appears.
The message “Reset default?” appears.
2
Select [OK] with v on the multi-selector, then press the center of the multi-selector.
The main functions are reset.
The main functions are reset.
• For details on the items to be reset, see “Reset default” (page 172).
Reset default