Справочник Пользователя для Netgear Smart Control Center (SCC)

Discovering Devices

When launched, the utility immediately searches the network for network devices.

Local PC firewall applications such as Symantec Endpoint 

Protection can prevent the utility from communicating with the 
switches. If the utility is unable to discover your switches and you are 
using a local firewall, you will need to turn off the firewall function in 
order for discovery to work.

Within a few seconds the utility discovers and lists all devices in your network or in the same 
broadcast domain. Discovery will continue through the network until blocked by a router or 
firewall.

The discovered devices are displayed as shown below. You can now select a device to 
configure or display its status.