Инструкции С Размерами для KitchenAid 15-Inch Width Panel-Ready Ice Maker with Reversible Door Swing

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.

Ref. W10340977A

6/3/11

A

B

C

A. Front - visible surface when installed
B. Hinge side
C. Notch to a depth of 

3

⁄

8

" (0.95 cm)

A. Recommended location for electrical and plumbing fixtures.
B. Hinge-side, back spacer (Install 6" [15.24 cm] from back wall to aid in

drain alignment)

C. Hinge-side front spacer (Install flush with front face of adjacent cabinet)

A

C

B

To achieve a flush installation with adjacent cabinets, prepare the custom overlay panel using the dimensions shown.

If you plan to install a custom overlay panel, you will need to make the panel yourself or consult a qualified cabinetmaker or carpenter.

■

The thickness of the overlay panel must be 

3

⁄

4

" (1.91 cm).

■

Overlay panel must not weigh more than 8 lbs (3.62 kg).

■

Overlay panels weighing more than recommended may cause damage to
your ice maker.

■

Match wood grain direction with that of adjacent cabinets.

■

Sand panel edges to provide a smooth finish.

■

Use moisture sealer on both sides and all edges of the panel to avoid
damage from moisture.