Справочник Пользователя для Zanussi ZDT16030FA

CLEANING THE UPPER SPRAY ARM
We recommend to clean regularly the upper spray arm to avoid soil to clog the holes.
Clogged holes can cause unsatisfactory washing results.

 

• Pull out the upper basket.

• To disengage the spray arm from the basket, press the spray arm upwards in the direction indicated by

the lower arrow and simultaneously turn it clockwise.

• Wash the spray arm under running water. Use a thin pointed tool, e.g. toothpick, to remove particles of

soil from the holes.

• To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by

the lower arrow and simultaneously turn it counterclockwise until it locks into place.

EXTERNAL CLEANING
• Clean the appliance with a moist soft cloth.

• Only use neutral detergents.

• Do not use abrasive products, abrasive cleaning

pads or solvents.

INTERNAL CLEANING
• Carefully clean the appliance, including the

rubber gasket of the door, with a soft damp

cloth.

• If you regularly use short duration programmes,

these can leave deposits of grease and

limescale inside the appliance. To prevent this,

we recommend to run long duration

programmes at least 2 times per month.

• To maintain the performance of your appliance

at its best, we recommend to use monthly a

specific cleaning product for dishwashers.

Follow carefully the instructions on the

packaging of the product.

If the appliance does not start or it stops during

operation. Before you contact an Authorised

Service Centre, check if you can solve the problem

by yourself with the help of the information in the

table.

WARNING! Repairs not properly done

may result in serious risk to the safety

of the user. Any repairs must be

performed by qualified personnel.

You cannot activate the appli-

ance.

• Make sure that the mains plug is connected to the mains sock-

et.

• Make sure that there is no damaged fuse in the fuse box.