Справочник Пользователя для Melitta Caffeo CI черная E 970-103

•  Carefully screw the Melitta

®

 Claris

®

water filter into the thread on the

base of the water tank using the screw-in aid at the bottom end of the 

coffee scoop provided.

•  Fill the water tank to the max. mark with fresh tap water and reinsert it.
•  Press the rotary switch.
•  Place a vessel with an approximate capacity of 0.5  l under the outlet 

and press the rotary switch to confirm.

 

→ The appliance rinses and then returns to standby mode. 

The water hardness is automatically set to Soft.

Change the water filter when a prompt to do so appears on the graphic display.

•  Select the Care sub-menu.
•  Turn the rotary switch until Filter is highlighted 

and press it to confirm the selection.

•  Turn the rotary switch until Change filter is 

highlighted and press it to confirm the selection.

•  Turn the rotary switch until Start is highlighted 

and press it to confirm the selection.

•  Lift the lid of the water tank (Fig. 

A, No. 6) and 

pull the water tank up and out of the appliance.

•  Unscrew the water filter from the thread on the base of the water filter.
•  Carefully screw the new Melitta

®

 Claris

®

water filter into the thread on

the base of the water tank using the screw-in aid at the bottom end of 

the coffee scoop provided.

•  Fill the water tank to the max. mark with fresh tap water and reinsert it.
•  Press the rotary switch.
•  Place a vessel with an approximate capacity of 0.5  l under the outlet 

and press the rotary switch to confirm.

 

→ The appliance rinses and then returns to standby mode.

Care

Filter

Descaling

Exit

Filter

Insert filter

Change filter

Exit