Справочник Пользователя для Moxa EDS-P510-T
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial Ethernet Solutions
EDS-P510 Series
Introduction
The EDS-P510 series Gigabit managed redundant Ethernet switches
come standard with 4 10/100BaseT(X) 802.3af (PoE) compliant
Ethernet ports and 3 combo Gigabit Ethernet ports. The EDS-P510
switches provide up to 15.4 watts of power per PoE port, and allow
power to be supplied to connected devices (such as surveillance
cameras, wireless access points, and IP phones) when AC power
is not readily available or is cost-prohibitive to provide locally. The
come standard with 4 10/100BaseT(X) 802.3af (PoE) compliant
Ethernet ports and 3 combo Gigabit Ethernet ports. The EDS-P510
switches provide up to 15.4 watts of power per PoE port, and allow
power to be supplied to connected devices (such as surveillance
cameras, wireless access points, and IP phones) when AC power
is not readily available or is cost-prohibitive to provide locally. The
Advanced PoE management function (PoE port setting, PD failure
•
check, and PoE scheduling)
IPv6 Ready logo awarded (IPv6 Logo Committee certified)
IPv6 Ready logo awarded (IPv6 Logo Committee certified)
•
IEEE 1588 PTP (Precision Time Protocol) for precise time
•
synchronization of networks
DHCP Option 82 for IP address assignment with different policies
DHCP Option 82 for IP address assignment with different policies
•
Modbus/TCP industrial Ethernet protocol supported
•
Turbo Ring and Turbo Chain (recovery time < 20 ms at full load),
•
and RSTP/STP (IEEE 802.1w/D)
IGMP snooping and GMRP for filtering multicast traffic
IGMP snooping and GMRP for filtering multicast traffic
•
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
•
planning
4 IEEE 802.3af-compliant PoE and Ethernet combo ports
›
Provides up to 15.4 watts at 48 VDC per PoE port
›
Intelligent power consumption detection, PD failure check, and
›
PoE scheduling function
3 combo (10/100/1000BaseT(X) or 100/1000BaseSFP slot) Gigabit
›
ports; 2 ports for redundant ring and 1 port for uplink
Turbo Ring, Turbo Chain, and RSTP/STP for network redundancy
›
IEEE 1588 PTP, Modbus/TCP, LLDP, SNMP Inform, QoS, IGMP
›
snooping, VLAN, IEEE 802.1X, HTTPS, SNMPv3, and SSH
supported
supported
Specifications
7+3G-port Gigabit PoE managed Ethernet switches
EDS-P510 switches are highly versatile, and their SFP fiber port
can transmit data up to 80 km from the device to the control center
with high EMI immunity. The Ethernet switches support advanced
management and security features. The EDS-P510 series is designed
especially for security automation applications such as IP surveillance,
and gate of entry systems, which can benefit from a scalable backbone
construction and Power-over-Ethernet support.
can transmit data up to 80 km from the device to the control center
with high EMI immunity. The Ethernet switches support advanced
management and security features. The EDS-P510 series is designed
especially for security automation applications such as IP surveillance,
and gate of entry systems, which can benefit from a scalable backbone
construction and Power-over-Ethernet support.
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
•
Port Trunking for optimum bandwidth utilization
•
SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network
•
security
Lock port function for blocking unauthorized access based on MAC
Lock port function for blocking unauthorized access based on MAC
•
address
SNMPv1/v2c/v3 for different levels of network management
SNMPv1/v2c/v3 for different levels of network management
•
RMON for efficient network monitoring and proactive capability
•
Bandwidth management to prevent unpredictable network status
•
Port mirroring for online debugging
•
Automatic warning by exception through e-mail, relay output
•
Features and Benefits
Technology
Standards:
IEEE 802.3af for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3af for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP,
RMON, HTTP, HTTPS, Telnet, SSH, Syslog, Modbus/TCP, SNMP
Inform, LLDP, IEEE 1588 PTP, IPv6
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP,
RMON, HTTP, HTTPS, Telnet, SSH, Syslog, Modbus/TCP, SNMP
Inform, LLDP, IEEE 1588 PTP, IPv6
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
MAC Table Size: 8 K
Packet Buffer Size: 1 Mbit
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
MAC Table Size: 8 K
Packet Buffer Size: 1 Mbit