Руководство По Установке для Samsung NY58J9850WS Gas Range with Dual Fuel Technology, 5.8 cu.ft

Скачать
Страница из 144
 
 English 39
Ins
tallation ins
truc
tions
Step 9. Install the anti-tip device
An anti-tip bracket and screws, installation 
instructions, and template are shipped 
with every range (PN DG94-00870B). The 
instructions include information necessary 
to complete the installation of the anti-tip 
bracket. Read and follow the instructions on 
the sheet and use the template for anti-tip 
bracket installation. If not properly installed, 
the range could be tipped by you or a child 
standing, sitting, or leaning on an open oven 
door.
To check if the bracket is installed and 
engaged properly, remove storage drawer 
and look underneath the range to see that 
the leveling leg is engaged in the bracket. 
Carefully tip the range forward. The bracket 
should stop the range within 4 inches 
(10.2 cm) of tipping. If it does not, the 
bracket must be reinstalled.
If the range is pulled from the wall for any 
reason, always repeat this procedure to 
verify the range is properly secured by the 
anti-tip bracket. Never completely remove 
the leveling legs or the range will not be 
secured to the anti-tip device properly.
 WARNING
To reduce the risk of tipping, the appliance 
must be secured by properly installing the 
anti-tip device packed with the appliance.
• All ranges can tip, resulting in personal 
injury.
• Tipping ranges can cause burns from spills, 
personal injury, and/or death.
• To prevent accidental tipping, install and 
check the anti-tip bracket following the 
instructions and template supplied with 
the bracket.
Anti-Tip bracket
*approximately 
21
/
32
" (16.5 mm)
Screw must enter 
wood or concrete
*NOTE: To install the Anti-Tip 
bracket, release the leveling leg.
A minimum clearance of 
21
/
32
(16.5 mm) is required between 
the range bottom and the 
kitchen floor.