Справочник Пользователя для Samsung 2010 Blu-ray Disc Player

English

Setup

Turn on your TV after connecting the player. 

(When you connect the player to a TV for the 

first time, the player turns on automatically 

and the Initial Settings screen appears.)

Press the ▲▼ buttons to select the desired 

language, and then press the ENTER button.
Press the ENTER button to select Start.

Press the ▲▼ buttons to select the desired 

TV Aspect Ratio, and then press the ENTER 

button. (See page 31)

1.

2.

3.

4.

Press the ◄► buttons to select the desired 

Network Settings : Wired, Wireless or PBC 

(WPS), and then press the ENTER button. 

If you do not know your Network Settings, 

press the BLUE (D) button on your remote 

instead to skip Network Settings here, finish 

the Initial Settings, and go to the Home menu.

If you selected a Network Setting, go to 

pages 37~41 for more information about the 

Network settings. When done, go to Step 6.
Press the OK button. 

The home menu is displayed. (For more 

information about home menu, please see 

page 29)

Home Menu

NOTE 

When the player is connected to TV for the first time, 

the player turns on automatically.  

This is not a malfunction.
The home menu will appear if you do not configure 

the initial settings except as noted below.
If you press the BLUE (D) button during the network 

setup, you can access the home menu even if the 

network setup is not completed yet.
When you return to the Home menu, the full screen 

mode is cancelled automatically.
If you want to display the Initial Setting screen again 

to make changes, press the STOP (   ) button on 

the front panel of the player for more than 5 seconds 

with no disc inserted.
If you use an HDMI cable to connect the player to an 

Anynet+(HDMI-CEC)-compliant Samsung TV, you 

have set the the Anynet+(HDMI-CEC) feature to On 

in both the TV and the player. 

If the TV uses a language supported by the player, 

that language will be set as the preferred language 

automatically.

5.

6.

•

✎

▪

▪
▪

▪
▪

▪

 

 Move  " Select

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English
Français
Deutsch
Español
Italiano
Nederlands

 

 Previous  " Select

Initial Settings

TV Aspect and Network will be set.
Each setting may be changed later under "Settings"

Start

 Previous 

 Skip  < Move  " Select

Initial Settings I Network

Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.

Wired : Set the network connection using the Ethernet cable.
Please make sure that the Ethernet cable is connected.

Wired

Wireless

PBC (WPS)

internet radio

You Tube

No Disc  a Change Device  

 View Devices  " Enter

Please activate Internet@TV service 

to enjoy a variety of Internet Services.