Справочник Пользователя для Samsung HT-H5500K

 - English

Settings

4. 

Enter your wireless network or wireless router's 
name.

•  Enter numbers directly using the number 

buttons on your remote control.

•  Enter letters by selecting a letter with the 

▲▼◄► buttons, and then pressing the E 
button.

•  To display capital letters (or redisplay lower 

case letters if capital letters are displayed), 

select 

, and then press the E button.

•  To display symbols and punctuation, select 

123#&, and then press the E button. To 
redisplay letters, select 123#&, and then press 
the E button.

When finished, select Done, and then press the 
E button. 

5. 

On the Security method screen that appears, 
use the ▲▼ buttons to select the network's 
Security method, and then press the E button. 
On the next screen, enter your network's 
security code or pass phrase.

•  Enter numbers directly using the number 

buttons on your remote control.

•  Enter letters by selecting a letter with the 

▲▼◄► buttons, and then pressing the E 
button.

When finished, select Done, and then press 
the E button. The product searches for the 
network.

6. 

The Network connection fail screen appears. 
Use ◄► buttons to select IP Settings, and 
then press the E button. 

7. 

Select the IP Setting field, and then set it to 
Enter manually.

8. 

Select a network parameter to enter (IP 
Address, for example), and then press E 
button. Use the number keypad on your remote 
control to enter the numbers for the parameter. 
You can also enter numbers using the ▲▼ 
buttons. Use the ◄► buttons on the remote 
control to move from entry field to entry field 
within a parameter. When done with one value, 
press the E button.

9. 

Press the ▲ or ▼ button to move to another 
parameter, and then enter the numbers for that 
parameter following the instructions in Step 8. 

10.  Repeat Steps 8 and 9 until you have filled in all 

parameters.

 

✎

You can get the Network parameter values from 
your Internet provider.

11.  When finished, select Return ('), and then 

press the E button. The Security Key screen 
appears.

12.  On the Security Key screen, enter your 

network's Security Code or Pass Phrase. Enter 
numbers directly using the number buttons on 
your remote control. Enter letters by selecting 
a letter with the ▲▼◄► buttons, and then 
pressing the E button.

13.  When finished, select Done at the right of the 

screen, and then press the E button. The 
product verifies the network connection and 
then connects to the network.

14.  After the home theater verifies the network, 

select OK, and then press the E button.

 

✎

You can also begin the Manual Network setup by 
going to Settings > Network > Network Status.

 

 WPS(PBC)

One of the easiest ways to set up the wireless 
network connection is using the WPS(PBC) function. 
If your wireless router has a WPS(PBC) button, follow 
these steps:

Follow the Steps 1 to 3 in "Configuring Your Network 
Connection". (See page 19)

1. 

In the Network Settings screen, change 
Network Type to Wireless. The product 
searches for and then displays a list of the 
available networks.

2. 

Scroll the list down, select WPS(PBC), and then 
press the E button.

3. 

Press the WPS(PBC) button on your router 
within two minutes. Your product automatically 
acquires all the network settings values it needs 
and connects to your network after the network 
connection is verified.

4. 

When it is done, highlight OK, and then press 
the E button.

 

✎

 For a WPS connection, set your wireless router’s 
security encryption to AES. WEP security 
encryption does not support a WPS connection.

HT-H5500K_30HK_30K_50HK_50K_XL-ENG-0317.indd   21

HT-H5500K_30HK_30K_50HK_50K_XL-ENG-0317.indd   21

2014-03-17     4:17:39

2014-03-17     4:17:39