Справочник Пользователя для ASUS p110
AP110 Server User’s Manual
29
Connect the Cables
1. Connect one end of the IDE
cable to the IDE connector at
the back of the drive, matching
the red stripe on the cable with
Pin 1 on the IDE connector.
the back of the drive, matching
the red stripe on the cable with
Pin 1 on the IDE connector.
2. Connect a power cable (plug
marked P3 or P4) to the power
connector at the back of the
drive.
connector at the back of the
drive.
3. Connect the other end of the
IDE cable to the primary IDE
connector (blue connector) on
the motherboard.
connector (blue connector) on
the motherboard.
IDE Cable
Red Stripe to Pin 1
Power Cable
(P3 or P4)
(P3 or P4)
2.6 Install a Hard Disk Drive
IDE HDD Cabling
The picture on the left shows an
installed HDD.
installed HDD.
Primary IDE Connector