Справочник Пользователя для AEG ko-lavamat 74335

Operating Instructions

30

The washing machine 
vibrates during opera-
tion or is unstable.

The transport packaging has 
not been removed.

Remove transport packaging 
according to the installation 
and connection instructions.

The height-adjustable screw 
feet are wrongly positioned.

Adjust the feet according to 
installation and connection 
instructions.

There is very little washing in 
the drum (e.g. only one 
dressing gown).

This does not impair the 
function.

The water could not be com-
pletely pumped out before 
spinning because
the drain hose is kinked or
the drain pump is blocked.

Check the drain hose and re-
move any kinks if necessary, 
or clean the drain pump and, 
if required, remove foreign 
bodies from the pump hous-
ing.

Excessive foaming dur-
ing the main wash.

Probably too much detergent 
was used.

It may be necessary to re-
duce the amount of deter-
gent used. Follow the 
detergent manufacturer's 
recommendations.

Water runs out from 
under the washing ma-
chine.

The screw connection on the 
inlet hose is leaking.

Tighten the inlet hose screw 
connection.

The drainage hose is leaking.

Check the drainage hose and 
replace it if necessary.

The drain pump cover is not 
correctly closed.

Close cover correctly.

Washing is caught in the 
door.

Stop the programme, remove 
washing from the door, start 
a new programme.

The emergency drain hose is 
not correctly sealed or is 
leaking.

Seal the emergency drain 
hose correctly (see section 
“Carrying out an emergency 
emptying“). Call your local 
AEG Service Force Centre if 
the emergency drain hose 
leaks.