Справочник Пользователя для AEG ucr

Скачать
Страница из 31
5 ENGLISH
TECHNICAL DATA
Voltage range .........................2.4-12 V
Quick charge current .............1.5-2,5 A
Maintaining charge .......................50 mA
Battery charging time
  1.2 Ah .......................approx 30-50 min
  1.4 Ah .......................approx 36-60 min
  4.0 Ah ...........................approx 2-3 h
  7.0 Ah ...........................approx 3-5 h
Weight without cable ...................1.4 kg
SAFETY INSTRUCTIONS
Please pay attention to the safety instructions in the attached 
leaflet!
Do not dispose of used battery packs in the household refuse 
or by burning them. AEG Distributors offer to retrieve old 
batteries to protect our environment.
Do not store the battery pack together with metal objects 
(short circuit risk).
Use only System 2000 chargers for charging System 2000 
battery packs. Do not use battery packs from other systems.
The following battery packs can be charged with this charger:
voltage 
battery 
rating 
No. of    
 
 
(of storage battery) 
battery  
 
 
 
cells
  2,4 V 
P 2.4-range 
 1,4 Ah 
  7,2 V 
P 7.2-range 
 1,4 Ah 
  9,6 V 
P 9.6-range 
 1,4 Ah 
  12 V 
P 12-range 
 1,2 Ah 
10
Do not try to charge non-chargeable batteries with this 
charger.
No metal parts must be allowed to enter the battery section of 
the charger (short circuit risk).
Never break open battery packs and chargers and store only 
in dry rooms. Keep dry at all times.
Please pay attention to the following symbol on the label of 
the charger:
 This tool is only suitable for indoor use. Never expose 
tool to rain.
Never charge a damaged battery pack. Replace by a new 
one.
Before use check machine, cable, and plug for any damages 
or material fatigue. Repairs should only be carried out by 
authorised Service Agents.
SPECIFIED CONDITIONS OF USE
The quick charger can charge AEG batteries from  
2.4 V to 12 V.
Do not use this product in any other way as stated for normal 
use.
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the 
system voltage indicated on the rating plate. It is also possible 
to connect to sockets without an earthing contact as the 
design conforms to safety class II.
BATTERIES
New battery packs reach full loading capacity after 4 - 5 
chargings and dischargings. Battery packs which have not 
been used for some time should be recharged before use.
CHARACTERISTICS
After inserting the battery into the reception of the charger the 
battery will automatically be charged (yellow control lamp is 
illuminated continuously)
When a hot or cold battery pack is inserted into the charger 
(flashing red lamp), charging will begin automatically once the 
battery reaches the correct charging temperature 
(5°C...45°C).
The battery’s charging time is between 5 min and 60 min (at 
1,4 Ah), depending on the state of discharge.
As soon as charging is completed, the charger switches over 
to ”trickle” charge to maintain the full capacity (green control 
lamp is illuminated continuously)
It is not necessary to remove the battery after charging. The 
battery can be stored permanently in the charger without the 
danger of being overcharged.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in 
conformity with the following standards or standardized 
documents. EN 60335, EN 55014-1, EN 55014-2, EN 61000-
3-2, EN 61000-3-3, in accordance with the regulations 73/23/
EEC, 89/336/EEC
Volker Siegle
 
Manager Product Development
MAINTENANCE
If the supply cord of this appliance is damaged, it must only 
be replaced by a repair shop appointed by the manufacturer, 
because special purpose tools are required
Use only AEG accessories and spare parts. Should 
components need to be replaced which have not been 
described, please contact one of our AEG service agents (see 
our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. 
Please state the ten-digit No. as well as the machine type 
printed on the label and order the drawing at your local 
service agents or directly at: AEG Elektrowerkzeuge, 
Max-Eyth-Straße 10, D-71364 Winnenden, Germany.