Справочник Пользователя для APRILIA leonardo 150
32
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
a
WARNING
Before departure, always carry out a
preliminary checking of the vehicle, to
make sure that it functions correctly
and safely, see the following table (PRE-
LIMINARY CHECKING OPERATIONS).
The non-performance of these checking
operations can cause severe personal
injuries or damage to the vehicle.
preliminary checking of the vehicle, to
make sure that it functions correctly
and safely, see the following table (PRE-
LIMINARY CHECKING OPERATIONS).
The non-performance of these checking
operations can cause severe personal
injuries or damage to the vehicle.
Do not hesitate to consult your
APRILIA
Official Dealer in case there is some-
thing you do not understand about the
functioning of some controls or in case
you suspect or discover some irregular-
ities.
It does not take long to carry out a
check-up and this operation ensures
you much more safety.
thing you do not understand about the
functioning of some controls or in case
you suspect or discover some irregular-
ities.
It does not take long to carry out a
check-up and this operation ensures
you much more safety.
02%,)-).!29 #(%#+).' /0%2!4)/.3
Component
Check
Page
Front and rear
disc brakes
disc brakes
Check the functioning, the idle stroke of the control le-
vers, the fluid level and make sure there are no leaks.
Check the wear of the pads. If necessary, top up the
brake reservoir.
vers, the fluid level and make sure there are no leaks.
Check the wear of the pads. If necessary, top up the
brake reservoir.
Brake levers
Make sure that they work smoothly.
If necessary, lubricate the articulations.
If necessary, lubricate the articulations.
–
Accelerator
Make sure that it works smoothly and that it is possible
to open and close it completely, in all steering posi-
tions. If necessary, adjust and/or lubricate it.
to open and close it completely, in all steering posi-
tions. If necessary, adjust and/or lubricate it.
Wheel/tyres
Check the tyre surface, the inflation pressure, wear
and tear and any damage.
and tear and any damage.
Steering
Make sure that the steering rotates smoothly, without
any clearance or slackening.
any clearance or slackening.
Side stand and
centre stand
centre stand
Make sure that they work smoothly and that the spring
tension brings them back to their normal position.
If necessary, lubricate joints and hinges.
tension brings them back to their normal position.
If necessary, lubricate joints and hinges.
Fastening elements
Make sure that the fastening elements are not loose.
If necessary, adjust or tighten them.
If necessary, adjust or tighten them.
–
Fuel tank
Check the fuel level and top up, if necessary.
Make sure there are no leaks or occlusions in the cir-
cuit. Make sure the filler cap is correctly tightened.
Make sure there are no leaks or occlusions in the cir-
cuit. Make sure the filler cap is correctly tightened.
Coolant
The coolant level in the expansion tank must be inclu-
ded between the "MIN" and "MAX" marks.
ded between the "MIN" and "MAX" marks.
Engine stop switch
(
(
n
-
m
)
Make sure that it functions correctly.
Lights, warning
lights, horn and
electrical devices
lights, horn and
electrical devices
Check the proper functioning of the acoustic and visual
devices.
Change the bulbs or carry out the necessary repairs in
case of failure.
devices.
Change the bulbs or carry out the necessary repairs in
case of failure.
).3425#4)/.3 &/2 53%
8102978.book Page 32 Friday, December 10, 1999 12:19 PM