Справочник Пользователя для APRILIA leonardo 150
63
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
#(!.').'
4(% (%!$,)'(4 "5,"3
Carefully read p. 62 (BULBS).
Carefully read p. 62 (BULBS).
The headlight contains:
– Two low/high beam bulbs.
– One parking light bulb (two parking light
– One parking light bulb (two parking light
bulbs
J
U
).
To change the bulbs, proceed as fol-
lows:
lows:
◆
Remove the front cover, see p. 53 (RE-
MOVING THE FRONT COVER).
MOVING THE FRONT COVER).
◆
Unscrew and remove the screws (1) and
take the washers.
take the washers.
◆
Remove the air conveyor (2) by with-
drawing it from the upper pins.
drawing it from the upper pins.
NOTE
Do not remove the protection ele-
ment (3) completely, since it is fixed to the
headlight body with two rivets.
headlight body with two rivets.
◆
By lifting the upper fastening tang, move
the protection element (3) with your hands.
the protection element (3) with your hands.
LOW BEAM BULBS/HIGH BEAM BULBS
(HALOGEN)
(HALOGEN)
a
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
do not pull its electric wires.
◆
Grasp the bulb electric connector (4),
pull it and disconnect it from the bulb (5).
pull it and disconnect it from the bulb (5).
◆
Rotate the bulb socket (6) anticlockwise
and extract it from the reflector.
and extract it from the reflector.
◆
Extract the bulb (5).
For the reassembly:
NOTE
Insert the bulb (5) in the reflector,
by making the two elements (7) on the bulb
coincide with the respective guides (8) on
the reflector.
coincide with the respective guides (8) on
the reflector.
◆
Position the bulb socket (6) in the reflec-
tor and rotate it clockwise.
tor and rotate it clockwise.
◆
Connect the bulb electric connector (4).
LOW/HIGH BEAM BULBS
J
U
◆
Rotate the bulb socket (9) anticlockwise
and extract it from its seat.
and extract it from its seat.
◆
Slig htly press the low/hig h beam bulb
(10) and rotate it anticlockwise, extract it
and replace it with a new one of the
same type.
(10) and rotate it anticlockwise, extract it
and replace it with a new one of the
same type.
PARKING LIGHT BULBS
a
CAUTION
To extract the bulb socket, do not pull
its electric wires.
its electric wires.
◆
Grasp the bulb socket (11), pull it and
take it out of its seat.
take it out of its seat.
◆
Extract the parking light bulb (12) and re-
place it with a new one of the same type.
place it with a new one of the same type.