Справочник Пользователя для Sony cdp-c250z

12

You can check your program before or after you start
playing.

Press CHECK.
Each time you press this button, the display shows the
track (the disc and track numbers) or the disc (the disc
number and “AL” indication) of each step in the
programmed order. After the last step in the program,
the display shows “End” and returns to the original
display. If you check the order after you start playing,
the display shows only the remaining steps.

You can change your program before you start playing.

Erase a track

Erase the last track in the
program

Add tracks to the end of the
program

Change the whole program
completely

To program other discs or tracks, do the following:

Other discs

Other tracks on the same disc

Other tracks on other discs

Press · to start Program Play.

Press CONTINUE.

While the disc tray is open, follow Steps 1 to 5 with
pressing DISC SKIP to check the disc labels. If you close
the disc tray before Step 5, the total playing time appears
in the display after a while.
Note that, if the programmed track number isn’t found
on the disc, that step is automatically erased.

When you press ·, you can play the same program
again.

If you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that aren’t found in the player or on the disc are
deleted from the program, and the rest of the program is
played in the programmed order.

The total playing time doesn’t appear when:

—You have programmed a track whose number exceeds 20.
—The total playing time of the program exceeds 200 minutes.

2

3

2 and 3

CHECK until the track you
don’t want appears in the
display, then press CLEAR

CLEAR. Each time you press
the button, the last track will
be cleared.

DISC 1 – 5 to select the disc,
then number buttons of the
tracks to be added

CLEAR until “ALL CLr”
appears in the display.
Create a new program
following the programming
procedure.