Справочник Пользователя для Sony dsr-dr1000a

32

Recording

Cha

p

te

r 3  
R

eco

rd

ing a

nd Pl

a

y

b

a

c

k

• When, in 4-channel mode, analog audio is selected 

for all four channels (channels 1/2 and 3/4), the same 
analog audio signals are recorded on channels 1 and 
3 and on channels 2 and 4, respectively.

When manually adjusting audio input levels, with the 
VARIABLE switch on the front panel set to REC, use 
the REC/PB LEVEL control knob for each channel to 
adjust the audio input level. Watching the audio level 
meter in E-E mode, adjust the level so that the meter 
does not indicate higher values than 0 dB when the 
audio signal is at its maximum. When the level 
exceeds 0 dB, the OVER indicator lights.

When recording at reference level
When the VARIABLE switch on the front panel is set 
to PRESET, recording is carried out at the preset 
reference level.

Reference level setting
The factory-preset reference level for analog audio 
input is 

−20 dB (DSR-DR1000A) or −18 dB (DSR-

DR1000AP). This setting can be changed using the 
LEVEL SELECT menu item (see page 68).

This section describes the procedure to perform normal 
recording on this unit, showing an example session in 
which playback signals coming from a player VCR will be 
recorded on the tape loaded in the unit.

When controlling this unit from an editing control unit 
connected to the REMOTE IN (R) connector of this unit, 
set the Control mode selector to REMOTE, turning the 
REMOTE indicator on. When not, set the switch to 
LOCAL, turning the indicator off.

If the REC INHI indicator lights:
The REC INHIBIT menu item (see page 62) is set to ON 
(recording inhibited). Set it to OFF.

Hold down the REC button and press the PLAY 
button on the recorder.

This unit starts recording.

Press the PLAY button on the player.

The player starts the playback operation.

Once you have started recording, you cannot change 
the audio mode or recording format.

Stop recording.

Press the STOP button.

Recorder
(this unit)

Player
(DSR-1500A/
1500AP)

Control mode 
selector