Справочник Пользователя для Sony PDW-F335KL

162

Maintenance

  

A

Check the functions of the camcorder before setting out for 
a shooting session, preferably by operating the camcorder 
together with a color video monitor.

Attach a fully charged battery pack.

Set the POWER switch to ON and check that the 
HUMID indicator does not appear and that the 
remaining battery capacity indicator (x) shows at 
least five segments.

• If the HUMID indicator appears, wait until it 

disappears (see page 161).

• If the remaining battery capacity indicator does not 

show at least five segments, replace the battery pack 
with a fully charged one.

Check that there are no obstructions near the disc 
compartment, and then press the EJECT button to 
open the disc compartment lid.

After confirming that the disc is not write-protected, 
load the disc and close the disc compartment lid.

Set the switches and selectors as follows.

Adjust the position of the viewfinder.

Check that the color bars are displayed on the 
viewfinder screen, and adjust the BRIGHT, 
CONTRAST, and PEAKING controls to give the best 
color bar display.

Check the following points in the listed order.

• The menu is displayed on the viewfinder screen.
• Turn the MENU knob and check that the menu page 

changes to the next page.

• Press the MENU knob and check that settings of 

each item of the selected page are displayed.

• Turn the MENU knob and check that the 

b mark 

moves within the page.

• Press the MENU knob and check that the 

b mark 

placed before the item changes to a z mark and the 
z mark placed before the setting of the item changes 
to a ? mark.

• Turn the MENU knob and check that the setting of 

the selected item changes.

Set the OUTPUT/DCC switch to CAM, and change 
the FILTER selector position in the sequence of 1 

t 

2 

t 3 t 4. 

Check that the FILTER indicator on the viewfinder 
screen displays the correct numbers.

Move the SHUTTER switch from ON to SEL 
repeatedly, and check that the shutter setting changes 
on the viewfinder screen.

Pointing the camera at a suitable subject, focus the 
camera and check the picture on the viewfinder screen.

Set both of the AUDIO IN switches to FRONT, and 
check that when sound is input to a microphone 
connected to the MIC IN connector on the front of the 
camcorder, the audio level indicators appear on the 
viewfinder screen.

Check that setting the ZEBRA button to ON and OFF 
makes the zebra pattern appear and disappear on the 
viewfinder screen.

The results of checking in steps 3 to 8 may not be as 
expected, depending on the settings relating to the 
viewfinder display function.  In this case, set the desired 
items on the VF DISP 1 and VF DISP 2 pages of the 
OPERATION menu.

Iris: A (auto)

Zoom: SERVO/MANU.

VDR SAVE/STBY: SAVE

GAIN: Set as low as possible

WHITE BAL: A or B

OUTPUT/DCC: BARS