Справочник Пользователя для Sony PDW-F335KL
47
Connecting
Cha
p
te
r 2
P
repa
ra
ti
ons
1
Make the following settings to prepare the external
VTR.
VTR.
• Set REC MODE to the same recording mode as that
of the camcorder.
• When the recording mode is set to DVCAM, select
either DF or NDF.
• Set AUDIO MODE to either 4-channel or 2-channel
mode, according to the disc that is played on the
camcorder.
camcorder.
2
Pause recording on the external VTR.
3
Play the disc on the camcorder.
4
Check the playback on the camcorder, and when
playback reaches the scene that you want to record,
start recording again on the external VTR.
playback reaches the scene that you want to record,
start recording again on the external VTR.
The copy to the external VTR starts.
5
When copy to the external VTR is finished, stop
playback of the disc on the camcorder.
playback of the disc on the camcorder.
For details about external VTR operations, see the
instruction manual supplied with the external VTR.
instruction manual supplied with the external VTR.
To control the camcorder from a VTR with editing
function
By connecting a VTR with an i.LINK connector to the
(i.LINK) DV OUT S400 connector of the camcorder using
an i.LINK cable (DV cable), you can control playback and
recording on the camcorder and perform cut editing and
digital copy.
function
By connecting a VTR with an i.LINK connector to the
(i.LINK) DV OUT S400 connector of the camcorder using
an i.LINK cable (DV cable), you can control playback and
recording on the camcorder and perform cut editing and
digital copy.
Example of connection
When using the DSR-2000A/2000AP, press the i.LINK
button on the remote control setting section of the VTR.
button on the remote control setting section of the VTR.
To use the automatic copying function of the DSR-2000A/
2000AP, it is necessary to set the recording format of the
camcorder to DVCAM on the FORMAT page of the
OPERATION menu.
2000AP, it is necessary to set the recording format of the
camcorder to DVCAM on the FORMAT page of the
OPERATION menu.
For details on the external VTR, see the instruction manual
supplied with the external VTR.
supplied with the external VTR.
To control the camcorder from a nonlinear
editing system
Using the i.LINK cable (DV cable), you can transfer video
and audio signals to a nonlinear editing system from the
camcorder. Editing software that supports the selected
recording format (DVCAM) must be used.
editing system
Using the i.LINK cable (DV cable), you can transfer video
and audio signals to a nonlinear editing system from the
camcorder. Editing software that supports the selected
recording format (DVCAM) must be used.
Example of connection
Operate the computer to set up the nonlinear editing
software.
software.
For details, see the software’s manual.
• Video edited using a nonlinear editing system cannot be
recorded to disc on this camcorder via an i.LINK cable
(DV cable).
(DV cable).
• When a disc with non-continuous timecode recorded is
subjected to video capturing on a nonlinear editing
system, the capturing precision may not be frame
accurate.
system, the capturing precision may not be frame
accurate.
Connections for Using the PDZ-1
To use the supplied PDZ-1 Proxy Browsing Software,
connect the computer on which PDZ-1 is installed to this
unit in FAM (file access mode).
connect the computer on which PDZ-1 is installed to this
unit in FAM (file access mode).
For details of the connection, see “Making FAM
connections” on page 157.
connections” on page 157.
For details of PDZ-1, see “Using the PDZ-1 Proxy
Browsing Software” on page 97.
Browsing Software” on page 97.
Note
External VTR
PDW-F335/F335P
DSR-2000A/2000AP, etc.
i.LINK cable
(DV cable)
(DV cable)
Notes
A computer in which
editing software
supporting the DVCAM
format is installed
editing software
supporting the DVCAM
format is installed
PDW-F335/F335P
i.LINK cable
(DV cable)
(DV cable)
Laptop computer