Справочник Пользователя для Sony EZ77NZ
69
Additional Information
Specifications
System
Channel coverage
SLV-EZ77AS/EZ66AZ (When COUNTRY is set
to AUS):
VHF AS0 to AS12, AS5A, AS9A
UHF AS28 to AS69
CATV S01 to S05, S1 to S41
SLV-EZ77NZ/EZ66AZ (When COUNTRY is set
to NZ):
VHF NZ1 to NZ11
UHF E21 to E69
CATV S01 to S05, S1 to S41
to AUS):
VHF AS0 to AS12, AS5A, AS9A
UHF AS28 to AS69
CATV S01 to S05, S1 to S41
SLV-EZ77NZ/EZ66AZ (When COUNTRY is set
to NZ):
VHF NZ1 to NZ11
UHF E21 to E69
CATV S01 to S05, S1 to S41
RF output signal
UHF channels:
28 to 69 (SLV-EZ77AS/EZ66AZ)
21 to 69 (SLV-EZ77NZ)
28 to 69 (SLV-EZ77AS/EZ66AZ)
21 to 69 (SLV-EZ77NZ)
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
LINE-1 IN (SLV-EZ77AS/EZ77NZ: SAT IN/STB IN)
or LINE-2 IN (or LINE-3 IN: SLV-EZ77AS/EZ77NZ
only)
or LINE-2 IN (or LINE-3 IN: SLV-EZ77AS/EZ77NZ
only)
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jack (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jack (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-1 OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
LINE-2 OUT
AUDIO OUT, phono jack (2)
Standard output: 327 m Vrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Standard output: 327 m Vrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
18 W (SLV-EZ77AS/EZ77NZ)
16 W (SLV-EZ66AZ)
16 W (SLV-EZ66AZ)
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430
×
97
×
288 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 4.1 kg
Power back-up
Built-in self-charging capacitor
Back-up duration: up to 8 hours at a time
Back-up duration: up to 8 hours at a time
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change
without notice.
without notice.
E
NERGY
S
TAR
®
is a U.S. registered mark.
As an
E
NERGY
S
TAR
®
Partner, Sony Corporation
has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.