Руководство По Установке для Panasonic SC-HT1500

≥Two screws are needed per speaker when attaching the speakers to a 

wall.

[Note]

≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when 

attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.

≥When mounting the front and surround speakers to a wall, we recommend using a string (not included) to prevent it from falling (

➡ below).

≥Use of optional speaker cables is recommended for wall mounted front and surround speakers. (You can also remove the speaker cables from the pipes 

supplied with this system).

∫ Preventing the speakers from falling over

Preparation
Attach screw eyes (not included) to secure the speakers to a wall 
(

➡ right diagram).

≥You will need to obtain the appropriate screw eyes to match the walls and 

pillars to which the screw eyes are going to be fastened.

≥Consult with a qualified housing contractor concerning the appropriate 

procedure when attaching to a concrete wall or a surface that may not 
have strong enough support. Improper attachment may result in damage 
to the wall or speakers.

1 Thread the string (not included) through the slot on the rear of the 

2 Loop the string through the screw eye and tie tightly.

p

Web Site: http://www.panasonic.co.jp/global/

RQT7627-B

F0604TJ0

Wall or pillar

30–35 mm

‰ 7.5–9.4 mm

8–11 mm

Move the speaker so that the screw is in 
this position.

In this position, the speaker will likely fall if 
moved to the left or right.

e.g. Front speaker

Screw eye (not included)

String (not included)