Справочник Пользователя для Epson LX-80

When you want to use single sheet paper in your LX-80, you can

remove the tractor unit quite easily. Just push back the two tractor
release levers shown in Figure E-5, tilt the unit backwards, and lift it

up.

Once your tractor is installed, you can load continuous paper. See

that the printer is turned off, and open the front lid. Then move the
print head to the center of the printer, and pull the paper bail away

from the platen (the black roller) just as you did for single sheet

loading. (Look back at Figure 1-7 if you need to check on the names
of any of these parts.)

Now, using Figure E-6 as your guide, pull the locking levers for-

ward so that you can move the pin feed holders to the left and right.

Put the left holder approximately 3/4 of an inch from the extreme left

position and then push the locking lever back to lock that holder in
place. Leave the other holder unlocked.

E-4