Справочник Пользователя для Philips ct1218-ffuu10g9

Скачать
Страница из 32
26
Troubleshooting
PROBLEM
SOLUTION
The phone does 
not switch on
Remove and reinstall the battery (see page 3). Then charge the 
phone until the battery icon has stopped flashing. Finally, unplug 
from the charger and try to switch the mobile on.
The display shows 
BLOCKED
 when 
you switch on
Somebody tried to use your phone but didn’t know the PIN code 
nor the unblocking code (PUK). Contact your service provider.
The 
n
 and 
q
 
symbols are not 
displayed
The network connection is lost. Either you are in a radio shadow 
(in a tunnel or between tall buildings) or you are outside the 
network coverage area. Try from another place or contact your 
operator for assistance or information about the network.
The display doesn't 
respond (or 
responds slowly) to 
key pushes
The display responds more slowly at very low temperatures. This 
is normal and does not affect the operation of the phone. Take the 
phone to a warmer place and try again. 
In other cases please contact your phone supplier.
Your phone doesn’t 
go to idle screen
Make a long press on 
e
, or switch off the phone, check that both 
SIM card and battery are installed correctly, and switch it on again.
Your phone doesn’t 
display the phone 
numbers of callers
This feature is network and subscription dependent. If the network 
doesn’t send the caller’s number, the phone will display 
Call 1
 
instead. Contact your operator for detailed information.
You can’t send text 
messages
Some networks don’t allow message exchanges with other 
networks. Contact your operator for detailed information.
When charging, 
the battery icon 
shows no bars, 
outline is flashing
Only charge the battery in an environment where the temperature 
does not go below 0°C (32°F) or above 50°C (113°F).
In other cases please contact your phone supplier.
Fisio121_GB_4311 255 53212.book  Page 26  Lundi, 27. mai 2002  3:08 15