Справочник Пользователя для Philips gc1408

 2

Unplug the iron when the temperature

light goes out.

 3

Move the iron gently over a piece of used

cloth to remove any water stains that have

formed on the soleplate.

 4

Let the iron cool down before you store it.

 1

Unplug the appliance and set the steam

control to the ‘no steam’ position.

 2

Empty the water tank (Fig. 10).

 3

Wind the mains cord round the cord storage

facility. (Fig. 11)

 4

Store the iron on its heel in a safe and dry

place.
Environment
Do not throw away the appliance with the

normal household waste at the end of its life,

but hand it in at an official collection point for

recycling. By doing this, you help to preserve

the environment (Fig. 12).
guarantee & service

If you need information or if you have a problem,

please visit the Philips website at www.philips.

com or contact the Philips Customer Care Centre

in your country (you find its phone number in

the worldwide guarantee leaflet). If there is no

Customer Care Centre in your country, go to

your local Philips dealer or contact the Service

Department of Philips Domestic Appliances and

Personal Care BV.

This chapter summarises the most common

problems you could encounter with your iron. If

you are unable to solve the problem, contact the

Customer Care Centre in your country.

Problem

Cause

Solution

The iron

is plugged

in but the

soleplate is

cold.

There is a

connection

problem.

Check the mains

cord, the plug and

the wall socket.

The

temperature

dial is set to

MIN.

Set the

temperature dial

to the required

temperature.

The iron

does not

produce

any steam.

There is

not enough

water in the

water tank.

Fill the water

tank (see chapter

‘Preparing for use’).

The steam

control is

set to the

‘no steam’

position.

Set the steam

control to a

steam setting (see

chapter ‘Using the

appliance’).

Water

leaks

from the

soleplate

during

ironing.

The iron

is not hot

enough.

Set the

temperature dial

to a temperature

suitable for steam

ironing ( 2 to 

MAX). Put the

iron on its heel

and wait until the

temperature light

goes out before

you start ironing.

The spray

function

does not

work.

There is

not enough

water in the

water tank.

Fill the water

tank (see chapter

‘Preparing for use’).

-

Problem

Cause

Solution

Flakes and

impurities

come out

of the

soleplate

during

ironing.

You

have used

hard water,

which has

caused

scale flakes

to develop

inside the

soleplate.

Use the Calc-Clean

function one or

more times (see

chapter ‘Cleaning

and maintenance’).

Water

leaks

from the

soleplate

while the

iron cools

down or

after it

has been

stored.

You have put

the iron in

horizontal

position

while there

is still water

in the water

tank.

Empty the water

tank and set the

steam control

to the ‘no steam’

position before you

store the iron (see

chapter ‘Storage’).

Store the iron on

its heel.

4239.000.6746.1

5/7