Справочник Пользователя для Philips MCD700
27
English
Other Functions
5
Press
CLOCK again to confirm the clock
setting.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the system
is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
– This system only supports 24-hour mode.
– The clock setting will be erased when the system
is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
Setting sleep/wake-up timer
Sleep timer setting
In power-on mode, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
the system to switch to standby mode
automatically at a preset time.
1
In power-on mode, press
SLEEP/TIMER on
the remote repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
00
00
➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70
➜ 80 ➜ 90 ➜ 00
2
When you reach the desired length of time, stop
pressing
pressing
SLEEP/TIMER.
➜
”
SLEEP” appears.
To deactivate the sleep timer
●
Press
SLEEP/TIMER repeatedly until “
00” is
displayed, or press
STANDBY ONB (B on
the remote).
In standby mode, the timer setting enables
the system to switch on automatically at a set
time.
the system to switch on automatically at a set
time.
Wake-up timer setting
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
– The volume of the timer will increase
gradually to the last tuned volume level.
If the last tuned volume level is too low,
the set will then increase to a
predetermined minimum audible level.
– Before setting the timer, ensure that
the clock is set correctly.
– The volume of the timer will increase
gradually to the last tuned volume level.
If the last tuned volume level is too low,
the set will then increase to a
predetermined minimum audible level.
1
Press and hold
SLEEP/TIMER until the time
flashes on the display.
➜
”
TIME SET” is displayed briefly. Then, the
hour digits flash on the display screen.
2
Turn
VOLUME -/+ clockwise or anticlockwise
or press
VOLUME -/+ on the remote to set
the hours.
3
Press
SLEEP/TIMER to confirm.
➜
The minute digits flash on the display screen.
4
Turn
VOLUME -/+ clockwise or anticlockwise
or press
VOLUME -/+ on the remote to set
the minutes.
5
Press
SLEEP/TIMER to confirm the time
setting.
➜
”
OFF” flashes on the display screen.
6
Turn
VOLUME -/+ clockwise or anticlockwise
or press
VOLUME -/+ on the remote to select
“ON”.
➜
icon appears on the display screen.
To deactivate the timer
●
Select “OFF” at Step 6.
pg001-031_MCD700_55_Eng
2005.5.18, 1:44 PM
27