Справочник Пользователя для Philips PNX2000

Скачать
Страница из 31
9397 750 13928
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data
Rev. 03 – 23 August 2004 
13 of 31
Philips Semiconductors
PNX2000
Audio video input processor
7.2 Interfaces
7.3 Features in detail
7.3.1 Video
Automatic Gain Control (AGC) to correct amplitude errors at input source.
Synchronization identification (used for channel search).
Sync processing for 1f
H
 and 2f
H
 video input source.
Standard detection of PAL, NTSC or SECAM and various 1f
H
 and 2f
H
 component 
video input sources.
1f
H
 video
Color decoding (ITU-601) for PAL, NTSC or SECAM input sources.
2D comb filtering.
Support for component video sources with sync on CVBS or green.
Fastblank insertion of RGB signals onto CVBS input.
2f
H
 video
Support for various progressive and interlaced component video sources.
Synchronization of video sources with sync on Y or external H/V inputs.
VBI data capture
TV sound decoder
DEMDEC 
DSP
Demodulation, decoding of terrestrial TV audio standards 
.
Audio processor
AUDIO DSP
Processing analog and digital audio sources.
Data Capture Unit
DCU
Acquires VBI data (Teletext; CC; VPS) and formats in a 
stream.
Formatter unit
ITU-656
Formats YUV, VBI data and CVBS data in ITU-656.
Bus Control Unit
BCU
Bus arbitration among all the internal blocks.
Table 17:
Block function
…continued
Function
Block
Description
Table 18:
Interfaces
Interface
Description
I
2
C-bus
The PNX2000 IC is controlled using an I
2
C-bus. It performs like an I
2
C-bus to PI-bus 
bridge, i.e. translates I
2
C-bus slave received commands to PI-bus master commands.
I
2
D
Receives data in three streams from PNX3000.
I
2
S-bus
Serial digital audio interface (6 stereo inputs, 6 stereo outputs) for connection to other 
devices that support the I
2
S-bus standard. Can be used to receive decoded sound 
from a multi-channel digital audio decoder, provide additional ADCs and DACs, or loop 
audio signals through an external processor or delay line.
ITU-656
Mainly intended to transfer output data stream externally to the PNX8550, but the 
output data stream could also be readable by other ITU-656 input devices that 
implement data valid signalling.
DACS
Digital-analog converters used to generate analog outputs from Sound Core.